Assessment of binding interaction to salmon sperm DNA of two antiviral agents and ecofriendly nanoparticles: comprehensive spectroscopic study.

The direct binding of antiviral agents; Daclatasvir and valacyclovir and green synthesized nanoparticles to salmon sperm DNA have been assessed in a comparative study. The nanoparticles were synthesized by the hydrothermal autoclave method and have been fully characterized. The interactive behavior and competitive binding of the analytes to DNA in addition to the thermodynamic properties were deeply investigated by the UV-visible spectroscopy. The binding constants were monitored in the physiological pH conditions to be 1.65 × 106, 4.92 × 105 and 3.12 × 105 for daclatasvir,valacyclovir and quantum dots, respectively. The significant changes in the spectral features of all analytes have proven intercalative binding. The competitive study has confirmed that, daclatasvir, valacyclovir, and the quantum dots have exhibited groove binding. All analytes have shown good entropy and enthalpy values indicating stable interactions. The electrostatic and non-electrostatic kinetic parameters have been determined through studying the binding interactions at different concentrations of KCl solutions. A molecular modelling study has been applied to demonstrate the binding interactions and their mechanisms. The obtained results were complementary and afforded new eras for the therapeutic applications.

FTIR spectroscopic study of two isostructural statins: Simvastatin and Lovastatin as authentic and in pharmaceuticals.

A very simple, economic analytical method with few sample pretreatment steps has been developed for quantitation of simvastatin in the presence of its isostructure lovastatin without any interference. It was utilized for easy and complete fine characterization of simvastatin FTIR spectrum from that of lovastatin. Simvastatin has been determined efficiently by the developed method either alone or in mixture with lovastatin giving LOQ values of 0.009 and 0.02% w/w, respectively indicating good sensitivity. Acceptable correlation coefficient values of 0.9975 and 0.9886 alone and in mixture with lovastatin, respectively. The developed spectroscopic method has provided simple and sensitive tool in quality control laboratories for efficient quantitation simvastatin in pharmaceutical tablets with good recoveries.

Development of a Validated Comparative Stability-Indicating Assay Method for Some H2-Receptor Antagonists.

A comparative force degradation high performance thin layer chromatography (HPTLC) method was developed and validated for some H2-receptor antagonists. The studied H2-receptor antagonists were ranitidine (RAN), nizatidine (NIZ) and famotidine (FAM). The degradation behaviors of the studied H2-receptor antagonists were studied under different stress conditions (hydrolytic, thermal and oxidative) conditions as well as storage conditions according to International Conference on Harmonization (ICH) recommendations. A stability-indicating HPTLC method was optimized in order to separate the analyte from the degradation products formed under various stress conditions. Full separation of the drugs from their degradation products was successfully achieved on an HPTLC precoated silica gel plates. Densitometric measurements were carried out using a Camag TLC Scanner III in the absorbance mode at 320 nm for RAN and NIZ, and 280 nm for FAM. The limits of detection and limits of quantitation range were 5.47-9.37 and 16.30-31.26 ng/band, respectively, for all investigated drugs. The validation studies were performed according to ICH requirements. The developed method was simple, rapid and reliable hence it could be applied for routine quality control analysis of the investigated H2-receptor antagonists in dosage forms. The kinetic behavior, degradation rate constants and half-lives of the degradation of the investigated drugs were studied and compared at different stress conditions. The present study provides, for the first time, a new vision to compare the degradation kinetics of H2-receptor antagonists at the same degradation procedures.

An Efficient Ion-Pair Liquid Chromatographic Method for the Determination of Some H2 Receptor Antagonists.

A simple, efficient and reliable ion-pair chromatography (IPC) method was developed and validated for the determination of some H2 receptor antagonists including ranitidine (RAN), nizatidine (NIZ) and famotidine (FAM). The use of IPC separations provided improved peak resolution with good peak shape in short analysis time and augmented method selectivity compared with the frequently used RP-C18 methods. A simple isocratic mode with mobile phase containing acetonitrile and 20 mM acetate buffer (50 : 50, v/v) containing 20 mM sodium dodecyl sulfate was used for separation. The flow rate was set at 1.0 mL min(-1), and the effluent was monitored by UV detector at 280 nm FAM and 320 nm for NIZ and RAN. The method was validated in accordance with International Conference on Harmonization guidelines and shown to be suitable for intended applications. The limits of detections and quantitations were 0.008-0.011 and 0.025-0.033 µg mL(-1), respectively. The proposed IPC method was successfully applied for the determination of pharmaceutical dosage forms without prior need for separation. Additionally, the developed method was applied for the determination of RAN in rabbit plasma using NIZ as the internal standard. The method entailed direct injection of the plasma samples after deproteination using methanol. Finally, the proposed IPC method was applied successfully in a pharmacokinetic study for RAN in rabbits after a single oral dose of RAN.

Micellar electrokinetic chromatographic determination of rosuvastatin in rabbit plasma and evaluation of its pharmacokinetics and interaction with niacin.

A specific, accurate, precise and reproducible micellar electrokinetic chromatographic method was developed for in vitro and in vivo estimation of rosuvastatin, a synthetic and potent HMG-CoA inhibitor, in rabbit plasma. Further, its pharmacokinetics in the presence of niacin, which could be co-administered for monitoring of severe hypercholestremia, was investigated. The assay procedures involved simple liquid-liquid extraction of rosuvastatin and internal standard, atorvastatin, from a small plasma volume directly into acetonitrile. The organic layer was separated and evaporated under a gentle stream of nitrogen. The residue was reconstituted in the mobile phase and injected electrokinetically into electropherosis system. The background electrolyte consisted of borate buffer (25.0 mm, pH 9.5), 10.0% organic modifier (5.0% methanol + 5.0% acetonitrile) and 25.0 mm sodium dodecyl sulfate at 20.0 kV applied voltage and 215.0 nm detection wavelength for the effective separation of rosuvastatin, niacin and atorvastatin.

Extractive spectrophotometric determination of some nonsteroidal anti-inflammatory drugs using methylene blue.

A simple, rapid, sensitive, and accurate extractive spectrophotometric method has been developed for the determination of seven nonsteroidal anti-inflammatory drugs (NSAIDs)--namely diclofenac sodium, ibuprofen, indomethacin, ketoprofen, ketorolac tromethamine, mefenamic acid, and naproxen-in pure forms as well as their pharmaceutical dosage forms (tablets, capsules, effervescent granules, syrups, oral drops, ampules, eye drops, gels, and suppositories). The method depends on the formation of an intensely colored ion-pair complex between the acidic drug and methylene blue in alkaline medium. The complex is stable and extractable into methylene chloride. All parameters were optimized. Beer-Lambert's law was obeyed in concentrations ranging from 0.04 to 9 microg/mL. Statistical analysis of the calibration data was carried out, and correlation coefficients were in the range from 0.9996 to 0.9998. The developed method was fully validated according to International Conference on Harmonization guidelines, and complied with U.S. Pharmacopeia guidelines. The proposed method was applied to the analysis of the investigated drugs in their pharmaceutical formulations, and good recoveries were obtained. The results obtained were compared with those of reported and official methods, and no significant differences were found with t- and F-tests. Interference effects of some compounds usually present in combination with NSAIDs were studied, and the tolerance limits of these compounds were determined.

Rapid and sensitive online determination of some selective α1-blockers by flow injection analysis with micelle-enhanced fluorescence detection.

A rapid, sensitive and selective flow injection analysis (FIA) method was developed for the determination of some selective α1-blockers including; terazosin (TER), doxazosin (DOX), prazosin (PRZ), and alfuzosin (ALF). The method was based on enhancement of the native fluorescence of the studied drugs in the presence of sodium dodecyl sulfate (SDS). The method was optimized for the buffer type, concentration and pH, surfactant type and concentration, flow rate and detection wavelengths in order to achieve the maximum sensitivity. The results showed that the best sensitivity was obtained by using SDS (10 mM) in phosphate buffer (20 mM, pH = 3), flow rate was 0.5 ml/min and the detector was set at λex = 250 and λem = 389. Under these optimum conditions there was a linear relationship between the concentration and the fluorescence intensity in the range from 5-400 ng ml(-) with correlation coefficient of more than 0.998. The detection and quantitation limits for the studied drugs by the proposed method were 3.2-11.9 ng ml(-1) and 10.8-39.7 ng ml(-1), respectively. The method was validated in accordance with the requirements of ICH guidelines and shown to be suitable for intended applications. Moreover, the binding constants for α1-blockers -SDS system were determined using the adduct model. The proposed method has been applied successfully for the analysis of the pure forms for studied drugs and also their pharmaceutical formulations and the results were compared with official methods.

Highly sensitive and selective high-performance liquid chromatography method for bioequivalence study of cefpodoxime proxetil in rabbit plasma via fluorescence labeling of its active metabolite.

Cefpodoxime proxetil (CFP), a broad-spectrum third-generation cephalosporin, has been used most widely in the treatment of respiratory and urinary tract infections. For bioequivalence study of CFP in rabbit plasma, it was necessary to develop a highly sensitive and selective high-performance liquid chromatographic (HPLC) method with fluorescence (FL) detection. The pre-column labeling of cefpodoxime acid (CFA) (active metabolite) with an efficient benzofurazan type fluorogenic reagent, 4-N,N-dimethyl aminosulfonyl-7-fluoro-2,1,3-benzoxadiazole (DBD-F) was carried out in the present study in 100mM borate buffer (pH=8.5) at 50°C for 15min. The obtained fluorescent products were separated on C18 column with an isocratic elution of the mobile phase, which consists of 10mM phosphate buffer (pH=3.5)/CH3CN (70:30, v/v). The fluorescent product (DBD-CFA) was detected fluorimetrically at 556nm with an excitation wavelength of 430nm. Cefotaxime sodium was used as internal standard. The method was validated according to the requirements of US-FDA guidelines. The correlation coefficient of 0.999 was obtained in the concentration ranges of 10-1000ngmL(-1). The limits of detection and quantification (S/N=3) were 3 and 10ngmL(-1), respectively. Plasma CFA levels were successfully determined in rabbit with satisfactory precision and accuracy. The proposed HPLC-FL method was successfully applied to study bioequivalence in rabbits for two formulations of different brands contained CFP (prodrug) in a randomized, two-way, single-dose, crossover study and all pharmacokinetic parameters for the two formulations were assessed.

Selective micellar electrokinetic chromatographic method for simultaneous determination of some pharmaceutical binary mixtures containing non-steroidal anti-inflammatory drugs.

A simple and selective micellar electrokinetic chromatographic (MEKC) method has been developed for the analysis of five pharmaceutical binary mixtures containing three non-steroidal anti-inflammatory drugs (NSAIDs). The investigated mixtures were Ibuprofen (IP)-Paracetamol (PC), Ibuprofen (IP)-Chlorzoxazone (CZ), Ibuprofen (IP)-Methocarbamol (MC), Ketoprofen (KP)-Chlorzoxazone (CZ) and Diclofenac sodium (DS)-Lidocaine hydrochloride (LC). The separation was run for all mixtures using borate buffer (20 mM, pH 9) containing 15% (v/v) methanol and 100 mM sodium dodecyl sulphate (SDS) at 15 kV and the components were detected at 214 nm. Different factors affecting the electrophoretic mobility of the seven investigated drugs were studied and optimized. The method was validated according to international conference of harmonization (ICH) guidelines and United States pharmacopoeia (USP). The method was applied to the analysis of five pharmaceutical binary mixtures in their dosage forms. The results were compared with other reported high performance liquid chromatographic methods and no significant differences were observed.

Spectrofluorimetric method for determination of some angiotensin II receptor antagonists.

A simple, rapid, accurate and highly sensitive spectrofluorimetric method has been developed for determination of some angiotensin II receptor antagonists (AIIRA's), namely Losartan potassium (Los-K), Irbesartan (Irb), Valsartan (Val) and Candesartan cilexetil (Cand) in pure forms as well as in their pharmaceutical dosage forms. All the variables affecting the relative fluorescence intensity (RFI) were studied and optimized. Under the optimum conditions, linear relationships with good correlation coefficients (0.9982-0.9991) were obtained over the concentration range from 0.006 µg/mL to 1.7 µg/mL. Good accuracy and precision were successfully obtained for the analysis of tablets containing each drug alone or combined with hydrochlorothiazide (HCTZ) without interferences from the co-formulated HCTZ or the additives commonly present in tablets.

Kinetic spectrophotometric method for determination of amlodipine besylate in its pharmaceutical tablets.

A simple and sensitive kinetic spectrophotometric method has been developed and validated for determination of amlodipine besylate (AML). The method was based on the condensation reaction of AML with 7-chloro-4-nitro-2,1,3-benzoxadiazole in an alkaline buffer (pH 8.6) producing a highly colored product. The color development was monitored spectrophometrically at the maximum absorption λmax 470 nm. The factors affecting the reaction were studied and the conditions were optimized. The stoichiometry of the reaction was determined, and the reaction pathway was postulated. Moreover, both the activation energy and the specific rate constant (at 70 °C) of the reaction were found to be 6.74 kcal mole-1 and 3.58 s-1, respectively. The initial rate and fixed time methods were utilized for constructing the calibration graphs for the determination of AML concentration. Under the optimum reaction conditions, the limits of detection and quantification were 0.35 and 1.05 µg/mL, respectively. The precision of the method was satisfactory; the relative standard deviations were 0.85-1.76%. The proposed method was successfully applied to the analysis of AML in its pure form and tablets with good accuracy; the recovery percentages ranged from 99.55±1.69% to 100.65±1.48%. The results were compared with that of the reported method.

An efficient one-pot reaction for selective fluorimetric determination of cefpodoxime and its prodrug.

Cefpodoxime proxetil (CFP), an oral third-generation cephalosporin, is a prodrug that is de-esterified in vivo to its active metabolite, cefpodoxime acid (CFA). Therefore, this study aimed to develop a facile and efficient one-pot reaction for selective and sensitive determination of CFA and its prodrug (CFP). The method was based on single-step reaction between CFP or CFA and 1,2-naphthoquinone-4-sulfonate (NQS) as a selective derivatizing reagent in alkaline medium without heating, extraction or reduction steps as usual for NQS derivatization reactions. The fluorescence of the formed NQS-derivative was monitored directly at emission wavelength of 440 nm after excitation at 330 nm. The method can easily be implemented in plating facilities by operators and/or incorporated in on-line derivatization reaction. The correlation coefficients of 0.9991 and 0.9984 were obtained in the concentration ranges of 50-2000 ng mL(-1) for CFA and CFP, respectively. The detection limits were 9.17 and 9.48 ng mL(-1) for CFA and CFP, respectively. The method was validated in accordance with the requirements of ICH guidelines and shown to be suitable for their efficient and sensitive determinations. The developed method was successfully applied for selective determination of CFP in pure form and in pharmaceutical dosage forms as well as CFA in human urine after single dose of CFP without prior need for separation. The method is valuable for quality control laboratories for monitoring of CFP and its active metabolite CFA.

Chemometric methods for the simultaneous determination of some water-soluble vitamins.

Two spectrophotometric methods, derivative and multivariate methods, were applied for the determination of binary, ternary, and quaternary mixtures of the water-soluble vitamins thiamine HCI (I), pyridoxine HCI (II), riboflavin (III), and cyanocobalamin (IV). The first method is divided into first derivative and first derivative of ratio spectra methods, and the second into classical least squares and principal components regression methods. Both methods are based on spectrophotometric measurements of the studied vitamins in 0.1 M HCl solution in the range of 200-500 nm for all components. The linear calibration curves were obtained from 2.5-90 microg/mL, and the correlation coefficients ranged from 0.9991 to 0.9999. These methods were applied for the analysis of the following mixtures: (I) and (II); (I), (II), and (III); (I), (II), and (IV); and (I), (II), (III), and (IV). The described methods were successfully applied for the determination of vitamin combinations in synthetic mixtures and dosage forms from different manufacturers. The recovery ranged from 96.1 +/- 1.2 to 101.2 +/- 1.0% for derivative methods and 97.0 +/- 0.5 to 101.9 +/- 1.3% for multivariate methods. The results of the developed methods were compared with those of reported methods, and gave good accuracy and precision.

Dual separation mode for simultaneous determination of antihypertensive drug combinations by high-performance liquid chromatography.

A simple, reproducible and efficient dual separation mode high performance liquid chromatographic (HPLC) method was developed for simultaneous determination of antihypertensive drug combinations including; hydrochlorothiazide (HCTZ), valsartan (VAL), amiloride (AML) and captopril (CAP). The newly developed Platinum™ column, which provides a dual-mode separation with its polar and non-polar sites, was used for rapid separation of these co-administered drugs. Good resolution was obtained when Platinum™ column was used compared with C(18) column. Additionally, simple isocratic mode with mobile phase containing methanol and 0.02 mole L(-1) phosphate buffer adjusted to pH 3.0 (45:55, v/v) was used for separation. The flow rate was 0.5 mL min(-1) and effluent was monitored at 270 nm. All the investigated drugs were completely separated within less than 6 min. The linearity range obtained for the developed HPLC method was 0.5-100 µg mL(-1) with detection limits of 0.13-1.2 µg mL(-1) for all the studied drugs. The method was validated in accordance with the requirements of ICH guidelines and shown to be suitable for intended applications. The method was successfully used for determination of the studied drugs in pure form and pharmaceutical dosage forms without prior need for separation. The method is valuable for quality control laboratories for simultaneous determination of these co-administered antihypertensive drugs in binary, ternary and quaternary mixtures.

Validated spectrofluorometric methods for determination of amlodipine besylate in tablets.

Two simple and sensitive spectrofluorometric methods have been developed and validated for determination of amlodipine besylate (AML) in tablets. The first method was based on the condensation reaction of AML with ninhydrin and phenylacetaldehyde in buffered medium (pH 7.0) resulting in formation of a green fluorescent product, which exhibits excitation and emission maxima at 375 and 480 nm, respectively. The second method was based on the reaction of AML with 7-chloro-4-nitro-2,1,3-benzoxadiazole (NBD-Cl) in a buffered medium (pH 8.6) resulting in formation of a highly fluorescent product, which was measured fluorometrically at 535 nm (lambda(ex), 480 nm). The factors affecting the reactions were studied and optimized. Under the optimum reaction conditions, linear relationships with good correlation coefficients (0.9949-0.9997) were found between the fluorescence intensity and the concentrations of AML in the concentration range of 0.35-1.8 and 0.55-3.0 microg ml(-1) for ninhydrin and NBD-Cl methods, respectively. The limits of assays detection were 0.09 and 0.16 microg ml(-1) for the first and second method, respectively. The precisions of the methods were satisfactory; the relative standard deviations were ranged from 1.69 to 1.98%. The proposed methods were successfully applied to the analysis of AML in pure and pharmaceutical dosage forms with good accuracy; the recovery percentages ranged from 100.4-100.8+/-1.70-2.32%. The results were compared favorably with those of the reported method.

Spectrofluorimetric determination of acetaminophen with N-bromosuccinimide.

A simple, sensitive, and selective method for determination of acetaminophen based on its oxidation using N-bromosuccinimide (NBS) to produce a highly fluorescent product. Optimization of reaction variables was carried out concerning NBS concentration, pH, temperature, reaction time, and stability time. Under optimal analytical conditions, the fluorescent intensity was measured at lambda emission. 442 nm (excitation at lambda 330 nm). The linearity range is 120-800 ng/mL with lower detection limit of 33.6 ng/mL acetaminophen. The method was applied successfully to the determination of the compound in pharmaceutical preparations, with average recovery of 100.3 +/- 2%. The method was also applied successfully to the determination of the drug in spiked plasma samples, with an average recovery of 101.2 +/- 1%. Interference effects of some compounds, present in combination with acetaminophen, were studied and the tolerance limits of these compounds were determined.